BACK TO SETUP

Connecting Drop Labs EP 01 to a VR Headset

To reach full immersion, here’s how to connect to a VR Headset.

Note: Some VR headsets have Bluetooth capabilities, but might suffer from delay when connected to Drop Labs EP 01. 

If you are using a VR Headset that uses sound from your PC or console, you can use the Headphone Splitter the same way as long as there is a 3.5 mm audio jack.

1. Connect the Headphone Splitter to the 3.5 mm audio jack of your VR Headset.
   
2. Connect your headphones into one of the ends of the Headphone splitter.
   
3. Connect the Low-Latency Gaming Cable to the remaining audio jack on the Headphone Splitter.
   
4. Connect the magnetic ends of the Low-Latency Gaming Cable to the charging ports of EP 01. When a secure connection is established, EP 01 will briefly activate and the lights will blink cyan for a moment.
   

USE CABLE CLIPS TO PREVENT TANGLING

Use the Cable Clips to prevent cords from tangling and moving around.

1. Attach the cylindrical portion of the clip to the cable.
2. Attach the clip to your clothing to keep it in place.
3. Move and adjust as needed to secure cables and ensure freedom to move.

BACK TO SETUP